Image Gallery > RST M29 Refresh Pics
-
dscn4900.jpg
Release all the air pressure.
-
dscn4897.jpg
Loosen and remove allen bolt.
-
dscn4898.jpg
Remove rebound lever with allen key.
-
dscn4899.jpg
Remove with allen key: Note...this is reverse threaded, so turn clockwise to loosen.
-
dscn4901.jpg
Fork can be separated. Clean it well and look for any seal or stanchion tube damage.
-
dscn4903.jpg
Clean out the grease from the slider assembly.
-
dscn4904.jpg
Remove allen screw and compression lever: Note...beware of loose ball bearings and springs under this lever.
-
dscn4905.jpg
Ball bearings removed...springs still in place (arrows). Remove the oil damper plunger (note: make sure the compression adjustment is on full open setting, all the way counter clockwise). Then the oil can be changed in this fork tube.
-
dscn4907.jpg
All assembled and cleaned with new oil and a light coating of clean grease.